Product Overview:
This is an Ignition Coil (Pencil Coil / Coil-on-Plug) with Bosch OE reference number F01R 00A 052, designed for GREAT WALL HAVAL H6 1.5T and a wide range of GWM 1.5T petrol engine platforms. The ignition coil is a critical component in the engine ignition system — it transforms the battery's 12V low-voltage current into high-voltage pulses (up to 35-40kV) to fire the spark plugs, igniting the air-fuel mixture in the cylinders.
Key Specifications:
- OE Part Number: F01R00A052 (also listed as F 01R 00A 052)
- Cross Reference Numbers: 3705100-F0000, 3705100-EG01T, F4J16-3705110, U5392, 9027, 9219A
- Part Name: Ignition Coil / Pencil Coil / High-Voltage Coil / ????
- Type: Coil-on-Plug (COP), single cylinder
- Connector: 3-pin
- Operating Voltage: 12V DC
- Secondary Output: 35-40kV peak
- Primary Resistance: 0.5-0.7Ω
- Material: ABS housing + metal core with epoxy potting
- Engine Compatibility: GW4G15B, 4G15B, GW4G15T, GW4G15E, SFG15T, SFG15T-01
- Condition: Brand New
- Warranty: 12-36 Months (depending on brand)
Primary Compatible Vehicles:
- GREAT WALL HAVAL H6 1.5T — GW4G15B / 4G15B engine (2013-2022, including 1st Gen Sport, 2nd Gen Sport, H6 Coupe)
- GREAT WALL HAVAL H2 / H2S 1.5T (2014+)
- GREAT WALL HAVAL M6 1.5T (2017+)
- GREAT WALL HAVAL F5 1.5T (2018+)
- GREAT WALL HAVAL JOLION 1.5T (2020+)
- GREAT WALL HAVAL Chitu (H6S) 1.5T (2020+)
- GREAT WALL C50 1.5T (2011-2015)
- GREAT WALL V80 1.5T (2012-2014)
- TRAUM SEEK5 1.5T (2018+)
- DFSK Glory 580 / S560 / ix5 1.5T (SFG15T engine)
?? Important Fitment Note:
The HAVAL H6 1.5T was produced with MULTIPLE engine variants, each using a DIFFERENT ignition coil part number:
- GW4G15B / 4G15B engine → F01R00A052 ? (this product)
- GW4G15E / 4G15E engine → F01R00A095
- GW4G15F / 4G15F engine → F01R00A0136
- GW4B15 / 4B15 1.5T → F01R00A121
- 2.0T models (GW4D20) → SMW251371
Please confirm your engine code is GW4G15B or 4G15B before ordering. Provide your VIN for fitment verification if unsure.
Additional Fitment Detail:
For vehicles with GW4G15B engine, there are TWO bolt-hole position variants that are NOT interchangeable:
- Side bolt hole version (SKU MAP-101015 equivalent)
- Rear bolt hole version (SKU MAP-101016 equivalent)
Both share the same 3-pin connector and F01R00A052 electrical specification, but the physical mounting differs. Please inspect your original coil's bolt hole position before ordering, or send us a photo of your original part for cross-check.
Product Advantages:
? OEM-Equivalent Performance — Manufactured to Bosch F01R00A052 original specifications, output peak voltage 35-40kV, perfectly matched to GWM GW4G15B ignition timing
? High Energy Output — Primary resistance 0.5-0.7Ω, secondary inductance 12-15mH, ensures strong spark penetration for complete combustion
? Durable Construction — Double-layer epoxy potting + aluminum shell heat dissipation, withstands 120°C+ continuous coil body temperature
? Rigorous Testing — Each unit undergoes high-voltage output test, insulation resistance test, and thermal cycling test before shipment
? Direct Replacement — 3-pin connector matches original wiring harness; plug-and-play installation, no modification required
? Smooth Engine Restoration — Eliminates misfires, rough idle, cold start difficulty, and unexplained fuel consumption increase caused by worn coils
Common Symptoms of Worn Ignition Coil:
- Engine misfires (DTC codes P0300-P0304)
- Rough idle or engine shaking at standstill
- Difficulty starting / extended cranking
- Loss of power during acceleration
- Unexplained increase in fuel consumption
- Check Engine Light (CEL) illuminated
- Visible cracks or carbon tracking on coil body
Installation Notes:
1. Disconnect battery negative terminal before starting work
2. Remove the engine top ignition coil cover
3. Disconnect the electrical connector (3-pin) from the faulty coil
4. Remove the mounting bolt (note: side or rear position per your vehicle's version)
5. Gently pull the coil upward to extract it from the spark plug well
6. Inspect the spark plug condition — replace if electrodes are worn or fouled
7. Insert the new coil F01R00A052, secure the mounting bolt, reconnect the 3-pin connector
8. Reinstall the coil cover, reconnect battery
9. Clear any stored misfire DTCs with a scan tool after replacement
10. Professional mechanic installation recommended; replace all 4 coils as a set for optimal balance
?? Best Practice: The GWM 1.5T 4-cylinder engine's ignition system has coupling characteristics — a single cylinder anomaly often triggers ECU learning compensation. We strongly recommend replacing all 4 coils together to avoid uneven ignition performance and misfire codes. Mixing old and new coils can cause drivability issues.
Packaging & Shipping:
- Individual box packaging with part number label and anti-static protection; 4-piece combo set packaging available
- Worldwide shipping via DHL / FedEx / TNT air express, or sea freight for bulk orders
- Lead time: 3-7 days for in-stock items; 10-15 days for bulk production
- MOQ: 1 piece (trial orders welcome); volume pricing available for 10+ pieces
After-Sale Service:
- 12-36 month warranty (depending on brand selection) against manufacturing defects
- Free replacement for incorrect or damaged parts shipped
- Technical support available — provide VIN, engine code, or photo of original coil for fitment verification
- For quality issues, contact us with photos/videos for prompt resolution
