Product Overview:
This is a Starter Motor (Starting Motor / ???) with OE reference number DAS15038-0200, specifically designed for the CHANGAN STAR 9 (???9) light commercial van / mini-truck platform [1,3](@ref). The starter is an electromagnetic motor that draws current from the battery to crank the engine — engaging the flywheel ring gear to initiate the combustion cycle. A failing starter leads to slow cranking, clicking sounds, or no-start conditions.
Key Specifications:
- OE Part Number: DAS15038-0200
- Part Name: Starter Motor / Starting Motor / Starter Assembly / ?????
- Operating Voltage: 12V DC
- Drive Type: Electric, gear reduction or direct drive (verify by original unit)
- Rotation: Clockwise (CW) — standard for most CHANGAN commercial platforms
- Mounting: Direct bolt-on to engine bell housing / gearbox housing
- Material: Aluminum alloy housing + high-carbon steel drive gear + copper winding armature
- Condition: Brand New
- Warranty: 12 Months
Compatible Vehicles:
Primary Fitment:
- CHANGAN STAR 9 (???9) — light commercial van / mini-truck series [1,3](@ref)
?? Fitment Verification:
The CHANGAN STAR 9 platform may be offered with multiple engine variants depending on market and model year. To ensure correct fitment, please:
1. Match the OE part number DAS15038-0200 against your original starter tag
2. Confirm your engine displacement (some STAR 9 variants use different starters)
3. Provide VIN or original part number for cross-check if unsure
4. Verify the physical dimensions (flange type, pinion teeth count, solenoid terminal position) match your original unit
Product Advantages:
? OEM-Equivalent Performance — Manufactured to original CHANGAN factory specifications (OE No. DAS15038-0200), ensuring precise fitment and reliable cranking torque [1,3](@ref)
? High Cranking Torque — Optimized armature winding and magnetic field strength deliver strong starting power even in cold weather conditions
? Durable Construction — Die-cast aluminum housing with anti-corrosion coating; high-carbon steel pinion gear hardened for extended service life
? Rigorous Testing — Each unit undergoes no-load speed test, load torque test, and solenoid pull-in test before shipment
? Direct Replacement — Matches original mounting flange, terminal configuration, and pinion engagement; no modification required
? Smooth Engine Starting Restoration — Eliminates slow cranking, clicking, and no-start symptoms caused by worn starter motor
Common Symptoms of Worn Starter:
- Engine cranks slowly or with reduced speed
- Audible clicking sound from the starter when turning the key (solenoid engages but motor doesn't spin)
- No cranking at all (complete failure)
- Intermittent starting issues (works sometimes, fails other times)
- Grinding noise during cranking (worn pinion gear or ring gear)
- Smoke or burning smell from the starter area (overheated windings)
- Starter stays engaged after engine starts (failed solenoid)
Installation Notes:
1. Disconnect battery negative terminal before starting work
2. Raise the vehicle and secure on jack stands if accessing from below
3. Label and disconnect the electrical terminals: main battery cable (large nut) and solenoid trigger wire (small connector)
4. Remove the two mounting bolts securing the starter to the engine bell housing
5. Carefully slide the old starter out, noting the routing of wires
6. Compare the new starter DAS15038-0200 with the old unit — verify pinion teeth count, flange shape, and terminal positions match
7. Slide the new starter into position, hand-thread the mounting bolts first, then torque to factory specification (typically 35-45 N·m)
8. Reconnect the solenoid trigger wire and main battery cable
9. Reconnect battery negative terminal
10. Test start the vehicle — listen for smooth engagement without grinding
11. Professional mechanic installation strongly recommended
?? Important: Before installation, always perform a battery health check and alternator output test. A weak battery or faulty charging system can damage a new starter prematurely. Also check the engine ground strap connection.
Packaging & Shipping:
- Individual box packaging with part number label and anti-static protection; bulk orders with wooden crate option
- Worldwide shipping via DHL / TNT / UPS / FedEx / SEA / AIR
- Lead time: 3-7 days for in-stock items; 10-15 days for bulk production
- MOQ: 1 piece (trial orders welcome); volume pricing available for 10+ pieces
After-Sale Service:
- 12-month warranty against manufacturing defects
- Free replacement for incorrect or damaged parts shipped
- Technical support available — provide VIN or original part number for fitment verification
- For quality issues, contact us with photos/videos for prompt resolution
